Olympus E-620 사용자 가이드

47

EN

j The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.

j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera 

shake by using the image stabilizer. 

g“Image stabilizer” (P. 64)

j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 101)

j You can set the aperture value using only the control dial. g“DIAL FUNCTION” (P. 96)

x

• Exposure compensation is not available in M mode.

You can take a picture with a bulb exposure time in which the shutter stays open as long as 
you hold down the shutter button.
Bulb shooting can also be done using an optional remote control (RM-1). 

g“Bulb shooting 

with the remote control” (P. 64)

In M mode, set the shutter speed to [BULB].
• [buLb] is displayed in the viewfinder and [BULB] on the 

super control panel.

j You can set the maximum time for bulb shooting. g“BULB TIMER” (P. 102)

j You can fix the focus so the focus does not change even if the focus ring is turned during 

exposure. 

g“BULB FOCUSING” (P. 96)

x

• The following functions are not available during bulb shooting.

Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketing

The viewfinder shows the focused area (depth of field) with the selected aperture value.
For the preview function to work by pressing the 

< button, it is necessary to set the function 

of the 

< button on the menu beforehand. g“; FUNCTION” (P. 97)

< button to use the preview function.

• When [

; FUNCTION] is assigned to [LIVE PREVIEW], 

pressing the 

< button automatically switches the camera to 

live view for a preview of the picture on the monitor.

< button

s0023_e_00_0_unified.book  Page 47  Monday, February 2, 2009  5:18 PM