Olympus E-620 사용자 가이드

78

EN

x

• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera’s flash 

intensity setting.

• When [w+F] is set to [ON], the flash intensity value will be added to the exposure 

compensation value. 

g“w+F” (P. 102)

The camera shoots multiple frames, changing the amount of light emitted by the flash for 
each shot. The camera shoots 3 frames at a time with the following amount of light: optimum 
light, light adjusted in the – direction, and light adjusted in the + direction.

• The compensation value will change according to the EV 

step. 

g“EV STEP” (P. 101)

• In single-frame shooting, the amount of light emitted by 

the flash changes every time the shutter button is 
pressed.

• In sequential shooting, hold down the shutter button until 

the selected number of frames are taken.

• Releasing the shutter button stops flash bracketing 

shooting. When it stops, 

0 blinks in the viewfinder 

and 

0 is displayed in green on the super control 

panel.

# + F j

i

p: [w]

MENU [X] [w]

MENU [X] [BRACKETING] [FL BKT]

8

F button

j

# button

s0023_e_00_0_unified.book  Page 78  Monday, February 2, 2009  5:18 PM