Olympus 1030 sw 빠른 설정 가이드

Me
nu opera

tions

EN

 39

• Operating the alarm:

Turn off the camera. The alarm only operates when the camera is off.

• Shutting off the alarm:

While the alarm is sounding, press any button to shut off the alarm and turn off the camera. 
Note that pressing o will turn the camera on.
When [SNOOZE] is [OFF], the alarm stops automatically and the camera turns off after 1 
minute of no operation.

• Checking the alarm settings:

While the camera is off, press 

g/E/Y to display the current and alarm set times. Times 

will be displayed for 3 seconds.

The factory default settings differ according to the region where the camera is sold.

To play back camera images on a TV, set the video output according to your TV’s video signal 
type.
• TV video signal types differ by country/region. Check the video signal type before connecting 

the camera to the TV.

NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China

Turn off the camera and the TV before connecting.

NTSC

 /   PAL

Connect to the TV’s video 
input (yellow) and audio 
input (white) terminals.

AV cable (provided)

Multi-connector

Connector cover

Settings on the TV
Turn the TV on, and set it to video input 
mode.
• For details of switching to video input, 

refer to your TV’s instruction manual.

• Images and the information displayed on 

the screen may become cropped 
depending on the TV’s settings.

Settings on the camera
Press o in playback mode to turn the 
camera on.
• The last picture taken is displayed on the 

TV. Use the arrow pad to select the 
picture you want to display.

d4354_e_0000_7.book  Page 39  Thursday, December 20, 2007  10:25 AM