Behringer eg2180 사용자 가이드

EUROGRAND

Basic operation

In our example the sounds „GRAND PIANO 1" and „STRINGS"

are layered.

To quit layer mode, press any button in the SOUND

SELECT section. This will also select one single sound

again.

Changing the sound character

4.2

You can change the sound character by using a room and a

modulation effect as well as a brightness equalizer.

Brightness equalizer

4.2.1

Use the brightness equalizer to change the sound character and

make it softer or more brilliant.

Change the sound character with the BRIGHTNESS control

as follows:

Move the control to the left (SOFT) for a softer sound

that is darker in tone.
Move the control to the right (BRIGHT) for a more

brilliant sound.

Room effects

4.2.2

The EUROGRAND provides room effects simulating four re-

verb rooms of different sizes. When you select a sound, the

EUROGRAND also selects an appropriate effect. If required,

however, you can always select any other effect. The following

reverb room simulations are available:
ROOM:

Simulates a small room.

HALL 1:

Simulates a small concert hall.

HALL 2:

Simulates a large concert hall.

STAGE:

Simulates a typical stage ambience.

Keep pressing the REVERB button until the effect of your

choice has been selected.

The active effect is shown by an LED lighting up next to the ef-

fect name.

If none of the four LEDs lights up, the room effect is

disabled.
Keep the REVERB button pressed while adjusting the origi-

nal vs. effect signal ratio in the VALUE/SONG section using

the -/NO and +/YES buttons.

The display reads:

0 ... 20:

Effect intensity

(0 = no effect, 20 = maximum effect)

If you want to restore the default settings, keep the REVERB

button pressed, then press -/NO and +/YES simultane-

ously.

Modulation effects

4.2.3

The EUROGRAND provides a modulation effect featuring four dif-

ferent types of effect. When you select a sound, the EUROGRAND

automatically adds an appropriate effect for some of the sounds.

If required, however, you can always select any other effect. The

following modulation effects are available:
CHORUS:

Chorus effect. „Widens" the sound.

FLANGER:

Time-shifted layering of sounds. Produces a

"floating" sound.

TREMOLO:

Rapid, constantly repeated changes in the

volume of the sound.

DELAY:

Echo effect. Produces time-shifted repetitions of

the sound that decay over time.

Keep pressing the EFFECT button until the effect of your

choice has been selected.

The selected effect is shown by an LED lighting up next to the

effect name.

If none of the four LEDs lights up, the modulation effect

is disabled.
Keep the EFFECT button pressed while adjusting the original

vs. effect signal ratio in the VALUE/SONG section using the

-/NO and +/YES buttons.