Hawking hnc230g 설치 설명서
1
Locate the antenna
connector on the left side
of the camera’s rear panel.
Screw the base of the
antenna (included with the
HNC230G) into the
antenna
of the camera’s rear panel.
Screw the base of the
antenna (included with the
HNC230G) into the
antenna
connector.
1
2
Locate the network
cable connector (RJ-45
port) on the camera’s rear
panel. Connect an Ethernet
cable to the port. Connect
the other end of the cable
to the network.
port) on the camera’s rear
panel. Connect an Ethernet
cable to the port. Connect
the other end of the cable
to the network.
Please
Note: For initial setup and
configuration, you will
need to use a wired
connection. After
completing the setup and
configuration, you can
begin using your network
camera wirelessly.
configuration, you will
need to use a wired
connection. After
completing the setup and
configuration, you can
begin using your network
camera wirelessly.
2
7