Avaya P550 사용자 설명서

Cajun P550/P220 Switch Operation Guide 

7-1 

This chapter and its procedures are specific to Layer 3 configuration. This chapter 
describes how to configure IP on your switch.

In the Cajun P550 Switch, capabilities that once were provided by additional hardware, 
such as bridges, switches, and hubs, are now provided as virtual configurations inside the 
router. You can emulate bridging capabilities inside the chassis of the Cajun P550 Switch 
through Virtual Local Area Networks (VLANs). The ability to emulate bridging hardware 
through a virtual means is referred to as IP Routing. High-level tasks involved in creating 
and setting up IP Routing include:

❒ Creating an IP Interface

❒ Enabling IP Routing

❒ Assigning IP Interfaces to the VLAN

❒ Configuring Access Lists

❒ Activating Access Lists

❒ Creating IP Static Routes

❒ Creating Static ARP Entries

❒ Creating a BOOTP/DHCP Server Entry

❒ Configuring IGMP

❒ Configuring DVMRP

For information about creating and assigning physical ports to a VLAN, refer to "Creating 
a VLAN", in Chapter 12. For information about enabling IP routing and assigning 
subnets, refer to the following sections.