Avaya P550 사용자 설명서

다운로드
페이지 335
Managing Intelligent Multicasting (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 
 15-13
2. Use Table 15-9 to configure the LGMP server.
Table 15-9.  LGMP Server Configuration Parameters
Parameter
Definition
Enable State
Select to enable or disable LGMP server configuration. The 
default value is Disabled.
Proxy Mode
Select to enable or disable Proxy mode. Proxy mode allows 
the server to send LGMP router report and leave messages 
on behalf of neighbor routers on the same VLAN.
Server ID Priority
The priority of the LGMP server on this switch. The server 
ID priority and the IP address associated with the VLAN 
determine whether the LGMP server wins LGMP 
distribution election. The lower the number the more likely 
it will win the election. The valid range is 0 to 255. The 
default value is 128.
Router Report Time
The time interval (in seconds) between router reports sent 
by the LGMP server in distributor state. The valid range is 
10 to 10,000. The default value is 125 seconds.
Robustness Variable
The scalar value used by non-distributor LGMP servers 
when timing out the LGMP server in the distributor state. 
The valid range is 2 to 10. The default value is 2.
LGMP Servers
Displays the number of LGMP servers and opens the LGMP 
Server Display per VLAN dialog box.
Note: 
Only VLANs that have an active IGMP interface 
can be LGMP servers.
LGMP Message 
Reception Statistics
• Router Report - Displays the number of LGMP router 
report messages received.
• Invalid - Displays the number of LGMP messages 
received with an invalid payload.