Avaya a500 사용자 가이드

Using the Cajun A500 Command Line Interface

Cajun A500 ATM Switch User Guide

 5-7

Telnet Capabilities

If the Cajun A500 is on an IP network, you can Telnet to it from a PC or workstation. For 

example:

telnet 198.3.104.162

TFTP Capabilities

Note:  System administration functions (TFTP, file, init, etc.) should only be 

attempted from a terminal connected directly to the console port on the front 

panel of the Cajun A500, not from a Telnet session.

In order to TFTP images to the PCMCIA card, use the following command:

A500: tftp get 

directoryname/SWP_IMAGE.IMG

Destination [PCMCIA:SWP_IMAGE.IMG]: 

IP address of TFTP Server [198.3.104.129]:

Where 198.3.104.129 is your TFTP server and the designated directory is the proper 

directory on the server. 

The internal flash is divided into two sections. The first is referenced as 

MAIN:

 and the 

second as 

FLASH1:

  When issuing a TFTP command, you want to get a configuration 

image which is called 

consolerc

. Reference the flash location as follows:  

tftp get 

MAIN:

config name

. If you want to put the image onto 

FLASH1:

, then you must adhere 

to the hard coded naming convention as follows: 

SWP_IMAGE.IMG

 or 

nvram.dat.

 

You cannot put a file into this location that has a different name than 

SWP_IMAGE.IMG

 or 

nvram.dat

.

The configuration files can only be TFTP'ed to the internal flash. The external PCMCIA 

flash can only receive the 

SWP_IMAGE.IMG

 and 

nvram.dat

. Thus, it is not divided into 

two sections like the internal flash.

To utilize the TFTP capabilities from the Cajun A500 Manager:

1. In the ATM Switch A500 section of the Web Agent window, select TFTP. The 

TFTP Set Server window opens.

2. Enter the TFTP Server Address. 

3. Click Apply to save your changes, or Cancel to restore previous settings.