Avaya a500 사용자 가이드

admin Commands

Cajun A500 ATM Switch User Guide

 6-13

The 

admin inband_address 

command enables you to set the IP address and subnet 

mask for the inband client or server in the Cajun A500. 

admin inband_address { IP address } { subnet mask }

This command requires the following argument(s):

Note:  The inband IP address must be on a subnet different than the one the 

Ethernet is on. This command will not allow you to put both IP addresses on 

the same subnet. The LEC does not come up if the LEC IP is cleared (0.0.0.0). 

In normal operation, changing the LEC IP does not take affect until the next 

reboot; however, if the LEC IP is changed from 0.0.0.0 to a valid IP address, 

the LEC uses the new IP address when it is enabled.

A500: admin inband_address

Enter IP address[0.0.0.0]: 198.3.106.111

Enter IP mask[0.0.0.0]: 255.255.255.0

New IP address and mask will be used when A500 is rebooted

IP address

Enter the new IP address using the syntax nnn.n.nnn.nn (e.g., 

198.4.112.22), or you can press Return to display prompts and 

current settings.

Subnet mask

Enter the new mask in the format nnn.nnn.nnn.nnn. If you want to 

leave the subnet mask unchanged, press Return.