Avaya P550 참조 가이드
IPX
Cajun P550/P220 Command Line Interface Reference Guide
3-29
.' .*
*
Specify which services (by network) are present in SAP packets sent and received on the
interface. The no form of this command removes the filter from an interface.
interface. The no form of this command removes the filter from an interface.
Table 3-12.
Parameters, Keywords, Arguments
To Enable:
ipx sap-network-filter <precedence> <filter-network>
<service-type> {outbound|inbound | both}
{filter|allow} [<filter-hops>]
To Disable:
[no] ipx sap-network-filter <precedence>
Name
Definition
precedence
A number indicating the precedence of this SAP
name filter in relation to other SAP name filters on
this interface. Lower numbers indicate a higher
precedence. The range is 0-9999.
name filter in relation to other SAP name filters on
this interface. Lower numbers indicate a higher
precedence. The range is 0-9999.
filter-network
The network of the service that this filter matches.
The range is 0 - FFFFFFFF where, FFFFFFFF
matches all networks.
The range is 0 - FFFFFFFF where, FFFFFFFF
matches all networks.
service-type
The type of the IPX SAP service, in hexadecimal. The
range is 0 - FFFF where, FFFF matches all service
types.
range is 0 - FFFF where, FFFF matches all service
types.
outbound|inbound| both
The filter direction.
• outbound - Apply filter to SAP packets sent out
the interface.
• inbound - Apply filter to SAP packets received
on the interface.
• both - Apply filter to SAP packets in both
directions.