Avaya P550 사용자 가이드
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-39
Figure 3-23. Switch Port Configuration Dialog Box
4. Use the parameters described in Tabl e3-15 to configure your
switch port.
Table 3-15. Switch Port Configuration Parameter
Parameter
Definition
Port VLAN
Select the VLAN assignment for this switch
port. The default value is Discard (no VLAN).
port. The default value is Discard (no VLAN).
Note:
Only one LEC per VLAN is permitted.
Allow Learning
Select Enable or Disable the port’s lea rning of
new addresses. The default value Enable.
new addresses. The default value Enable.
Spanning Tree
Mode
Mode
Select Enable or Disable spanning tree protocol
on this port. The default value is Enable.
on this port. The default value is Enable.
Fast Start
Select Enable or Disable fast start on this port.
The default value is Disable.
The default value is Disable.
Mirror Port
Allows you to select a second port for
diagnostic monitoring.
diagnostic monitoring.
Note:
This is not available for the ATM
Uplink module.