Avaya 3410 사용자 가이드

Avaya 

3400 Series Wireless Telephone User Guide 

Dual Charger 

Overview  The Dual Charger is a two-slot desktop charger designed to charge 

the Battery Pack. The handset is placed in the front compartment 
and a single spare Battery Pack may be placed in the rear slot. Either 
slot can be chosen to take priority (the first Battery Pack placed into 
either slot is charged first) so that the handset is always ready for 
use. Full charging is accomplished in approximately two hours for 
each Battery Pack. The Dual Charger will only charge Nickel Metal 
Hydride (NiMH) Battery Packs; this charger will not charge Nickel-
Cadmium (NiCd) Battery Packs.  
The Dual Charger will only successfully charge NiMH Battery Packs 
with a YELLOW label on the handset contact side. Older Battery 
Packs with a GREEN label will not charge in the Dual Charger. If 
the indicator light is flashing with a Battery Pack or handset in the 
slot, check to make sure the Battery Pack has a YELLOW label. 

Power supply  Four different models of the power supply for the Dual Charger are 

available for regional power requirements. The correct power 
supply must be ordered separately when the charger is ordered. If 
any questions arise, please contact your service representative. 

  Set up the Dual Charger by placing it on a flat, horizontal surface in 

order to ensure proper contact with the Battery Pack contacts. 
Connect the power supply to the charger and plug the power supply 
into an appropriate wall outlet. The LEDs will light only when a 
handset or Battery Pack is inserted into the slots. 

555-301-701, Issue 2, July 2005 

Page 11