Avaya 3749 사용자 가이드

3. Select one of the following:

●

No action – No action will be performed when the telephone is placed in charger 
duringa a call.

●

Loudspeaking – The loudspeaker will be turned on when the telephone is placed in 
charger during a call. The loudspeaker will be turned off when removing the telephone 
from charger.

●

End call – The ongoing call will be disconnected when the telephone is placed in 
charger.

Calls can be redirected to another extension when the cordless telephone is placed in a 
charger. Then it will not ring when receiving a call. The function is automatically cancelled when 
the telephone is removed from the charger.

1. Select In charger.

2. Select Other actions.

3. Select Redirect.

Note:

The function and the extension must be programmed in the PBX to be able to 
redirect calls.

When the cordless telephone is placed in the charger, it can be switched off while it is charging. 
When it is removed from the charger, it will switch on again.

1. Select In charger.

2. Select Other actions.

3. Select Switch off.

When the cordless telephone is placed in the charger, the tones can be switched off while it is 
charging. When it is removed from the charger, the tones will be switched on again.

1. Select In charger.

2. Select Other actions.

3. Select Sound off.

Note:

If the parameter Disable permanent mute is enabled, the telephone will not be 
muted when placed in charger. See Installation and Administration Manual, 
DECT R4.