Avaya 3749 사용자 가이드

●

The telephone receives a notification that the alarm has been received by the system. This 
is a system dependent feature.

●

An ALS is played. See 

●

A call to a predefined number is established, see 

Note:

When the vibrator is enabled, the telephone will alternate between vibration and 
sound. That is, vibration and sound are not activated simultaneously.
The ALS will no be played if the Automatic call after alarm option is enabled.

Man-down alarm: If the telephone is tilted 45º (default) or more for a preset time (default 7 
seconds), the Man-down alarm is triggered. 

No-movement alarm: If no movement is detected during a preset time (default 30 seconds), the 
No-movement alarm is triggered.

When an alarm is triggered, the following occur depending on the settings:

●

 A dialog window "Man-down warning. Cancel?" or "No- movement warning. Cancel?" is 
shown in the display, and a warning tone is also played for a period (default 7 seconds) 
before the alarm is sent. 

●

To prevent the alarm from being sent and to silence the warning tone, do one of the 
following:

●

Press any key or button. The alarm is reset. 

●

Put the telephone in a charger. The alarm is temporarily disabled, and the 
corrensponding alarm icon is hidden. The alarm is enabled when you remove the 
telephone from the charger.

●

If no key or button is pressed during the warning tone, the alarm is sent. Depending on set 
parameters, a beep, vibrator, or LED signal confirms that the alarm has been sent. 

●

An ALS may be activated after the alarm has been sent. See 

●

A call to a predefined number is established. See 

on page 84.

Depending on set parameters, the ramped up ALS is played after an alarm. The signal is always 
ramped from the lowest volume to the highest. Press the Mute button 

 to turn the ALS off. 

Depending on the PDM settings, it is possible to make the user enter a password when turning 
the ALS off. This password is the same as the phone lock password.