Avaya 6402 사용자 설명서

ffffffffffffffffffffffffffffffffffffff

This test requires compatible AT&T equipment at the remote end.

The remote loopback test ensures that no problems with data transmission are occurring in the
data transfer circuit.  When you initiate a remote loopback test, data is transmitted from the data
terminal, through your ADM and the network to the data module at the far-end, where it is
looped back to your ADM.  A data call must be established before you initiate a remote loopback
test.

To initiate a remote loopback test:

Establish a data call.

Rapidly type the Attention sequence (default value is +++).

Type at the 

CMD: 

prompt:

test remote

.

The ADM will display:

REMOTE LOOPBACK TEST
ENTER ATTENTION SEQUENCE TO END TEST

Or, if you are not on a data call, the ADM’s response is:

Test Remote cannot be used at this time

Type characters on your terminal keyboard and check to see that they are being echoed as
typed.

If you find no errors, the ADM passed the test.

Rapidly type the Attention sequence (default value is +++) to end the test.  Ending the test
does not end the call.  You will return to local mode, and the ADM will be ready to transmit
data.

Call Status:  Data Call Active
Type H for help.

At the 

CMD: 

prompt, type 

continue 

to return to Data Mode.

Loopback Test.)R

Chapter 5