Avaya 6211 사용자 설명서

ffffffffffffffffffffffffffffffffffffff

For example:

set

echo

set

text

Values in pA are not

bbb  automatically stored.  Unless you only want to temporarily change

options, it is important to save any changes by copying pA to one of the stored profiles.
In the event of a power failure, pA values are overwritten by values in p1.

To store pA, at the 

CMD: 

prompt type:

copy pA to p1

or, for example,

copy pA to p4

In all of the above procedures, the word "to" is optional.  Examples of the command
without "to" are:

If you want to save the active profile as a stored profile, type:

copy pA to p2

The above command stores your active profile in p2.  The system responds:

p2 updated.

If you want to store your active profile in p1, repeat the steps above but substitute p1 for p2.
Remember, in pA you cannot program your options; the settings in pA, therefore, are not
automatically stored.  You must copy pA to a stored profile (p1, p2, p3, or p4), so your active
profile is not lost in the event of a power failure.

To activate a stored profile, type the following command at the 

CMD: 

prompt:

copy 

to pA

For example, to activate p1, type:

copy p1 to pA

The ADM activates the profile requested and responds:

pA updated

Chapter 4