Avaya 6211 사용자 가이드

You can place two types of outgoing calls:

Outgoing calls from system users who request connection to a trunk (outside line) so they
can dial an outside number.

Outgoing calls from system users who request that you complete an outside call” for them.
The procedure consists of connecting to a trunk, then dialing the requested outside
number. This type of call handling assists users who are not allowed to make outgoing
calls, or users with very busy schedules.

When you receive either request, the calling number is displayed. You hear an audible ring.
ATND  light flashes, and  PA  light goes off.

1.

4.

Press 

 . Ask the caller to stay on the line.

Ringing stops.  ATND  light goes on.

Ask the caller for instructions.

If it is necessary to determine if a caller has permission to make outgoing calls (local

or toll), do Step 4.

Press 

 . Restrictions, if any, will be displayed. Press 

 again to restore the

calling number.

1.

If Call Detail Recording and Reporting (CDRR) is assigned and calls are to be
charged to an account number, do Steps 2 and 3; if CDRR is not assigned, go to
Step 4.

2.

Press 

Listen for dial tone.

3 .

Dial CDRR account

Listen for dial tone.

SPLIT  light goes on. Caller is separated from the connection.

number access code and Account Charge Number.

4 .

If the call is to be placed on a private network and Automatic Alternate Routing (AAR)

and/or Automatic Route Selection (ARS) features are active, do Step 5 to connect a
trunk; if AAR/ARS is not active, go to Step 6.