Avaya 8434 사용자 가이드

When placing calls or using the voice features, you have the option of doing so
by lifting the handset or by pressing [ 

 ] . If your voice terminal is set for the

Speakerphone feature, pressing [ 

 ] simultaneously activates the built-in

microphone so you can place and answer calls without lifting the handset.

Note:  Before you can use this feature, AD buttons must first be assigned by your
system manager.  If you hear the intercept tone while programming, start over from
the beginning.

You may also be able to use the following softkey features with Abbreviated Dialing.
(Press [ 

 ] and then the softkey below the feature abbreviation.)

•

•

Program (labeled Prog) — You can program a telephone number, extension, or
feature access code on an AD button.

Pause (labeled Pause) — A 1.5-second pause can be placed in an AD number,
such as between an access code and the telephone number.

•

•

•

Mark (labeled Mark) — Numbers included after a Mark on an AD button are
dialed in Touch-Tone signal form.

Wait (labeled Wait) — Numbers included after a Wait on an AD button are
delayed 5 to 25 seconds until the voice terminal receives dial tone from the
switch.

Suppress (labeled Spres) — Suppressed numbers are dialed but not shown on
the display (an “s” appears instead). Used for passwords or authorization codes.

To program/reprogram
an AD button

Note:  AD buttons must
first be assigned by
system manager.

On a separate sheet of paper, write down the outside
numbers, extensions, and/or feature access codes you
want to program.

Note:  Each AD button will hold one complete phone
number or feature access code (up to 24 digits).

Pick up handset

[dial tone]

Note:  If you are using the built-in speakerphone,
you must either press a call appearance button or
press [ 

 ] before you begin Step 3.