Avaya callmaster iv 설치 설명서

다운로드
페이지 26
Basic Voice Terminal Operations
24  
Issue  5   August 2005
Select Ring (and Ringer Volume)
To select a personalized ring
NOTE:
There are eight different ringing patterns from which to choose.
1. Press 
.
Green light next to 
 goes on steadily.
2. Press 
.
Green light next to 
 winks.
Current ring pattern plays and repeats every three seconds.
Display shows the pattern you are currently hearing:
       
(“x” will be a number from 1 to 8.)
3. Continue to press 
 to cycle through all eight ring patterns.
4. When you hear the desired ring pattern, press 
 again.
Your new ring is set; the light next to 
 goes off.
NOTE:
If you receive a call, go off-hook, or lose power during selection, the 
process is interrupted and you must start again. If you lose power 
after you have selected your personalized ring, you will have to select 
your ringing pattern again.
You can raise or lower the volume of the tone ringer under the following 
conditions:
The CALLMASTER IV is on-hook, and the headset is unplugged.
The voice terminal is off-hook on the external speakerphone.
A call is ringing at the voice terminal.
You are in the process of selecting a personalized ringing pattern for 
your voice terminal.
Select
Select
Conference
Ring
Select
Personal Ring #x
Conference
Ring
Select
Select