Avaya bis 10 빠른 설정 가이드
BRI
Access
Button Quick Reference
Automatic Callback
With the Callback feature, you can automatically
place a call to the last telephone number called to
a BRI Personal Line, even if the caller’s number is
unknown,
Procedure
Follow these steps:
1. With the telephone receiver off-hook, press
a BRI Personal Line, even if the caller’s number is
unknown,
Procedure
Follow these steps:
1. With the telephone receiver off-hook, press
the
Personal Line
button,
The Personal Line green LED lights,
You receive a dial tone.
You receive a dial tone.
Proceed to step 4.
2 .
3.
If more than one BRI line is assigned as a
Personal Line button and you do not know
Personal Line button and you do not know
which Personal Line button was used to
receive the last call, follow steps 2 and 3:
receive the last call, follow steps 2 and 3:
If your telephone is an MLX display set, press
the BRI Access button. You receive the
display: Dial 4 for In; 6 for Out. Dial 4 which
represents the letter “l” for incoming calls,
the BRI Access button. You receive the
display: Dial 4 for In; 6 for Out. Dial 4 which
represents the letter “l” for incoming calls,
The red LED (which represents the MERLIN
LEGEND Idle Line Preference feature) moves
to the last Personal Line button used to
receive an incoming call on a BRI line.
to the last Personal Line button used to
receive an incoming call on a BRI line.
The green LED next to the BRI Access Button
goes off.
Lift the receiver, or if the telephone is
Lift the receiver, or if the telephone is
4. Dial the
feature code
to activate the
Callback feature.
The telephone number from which the last
call was received on the BRI line is
automatically dialed by the CO.
— If the telephone number being called is
automatically dialed by the CO.
— If the telephone number being called is
available, you hear ringback, Identify
yourself to the party called.
— If the number is busy the CO “camps” or
queues the call at the called number When
the number is available, the CO calls you
the number is available, the CO calls you
back on the BRI line used to place the call.
All telephones sharing the Personal Line
button ring with a priority ring (four-burst
ring for MLX sets; three-burst ring for
analog multiline phones) to indicate the
completed call.
analog multiline phones) to indicate the
completed call.
equipped with a speakerphone, press the
Speakerphone
button.
The green LED lights.
You receive a dial tone.
You receive a dial tone.
Proceed to step 4.