Avaya 18d 사용자 가이드

This System Programming procedure, which applies to all system extensions,
defines the number of times a transferred call rings before it goes to the transfer
return extension.

■

■

■

If you program Hunt Group Extensions (#505), make sure this setting is
four or more rings. This setting allows the call to continue hunting to other
group extensions if it is not answered by the first group extension where it
rings.

By default, transferred calls return to the originating extension if they are not

answered. You can use Transfer Return Extension (#306) to specify a
different return extension for the extension that transfers a call.

If an extension has VMS Cover active, unanswered calls to that extension

are routed to the voice messaging system rather than the transfer return
extension.

■

■

If you have a fax machine or an answering machine connected to the

system, set Transfer Return Rings to a number greater than the number of
rings at which these devices answer. Doing so prevents a call transferred to
a fax or answering machine from returning before it is answered.

The system does not start counting the number of rings for a transferred call
(to determine when it goes to the transfer return extension if it is not
answered) until the transfer originator hangs up.

0–9 (0 rings = no return)
4  

✔

To change the number of times a transferred call rings before returning to the
transfer return extension:

1.

2.

3.

Press 

 

   

   

   

   

   

   

   

   

 .

Enter a different setting (0–9). For example, to set a Transfer Return of 5 rings,
press 

 

  

until the display reads:

Transfer Return

5 Rings

Select another procedure or exit programming mode.

Transfer Return Rings (#105)