Avaya 1224 사용자 가이드
4. Dial ✳ 8.
5. Dial the route number (0 through 9) you want to erase.
6. Dial the route code of the route you want to erase.
22 =
Day Route
21 =
Night Route
7. Dial 0, the transfer code for “No Operation.”
8. Dial # #.
The two-beep confirmation tone sounds.
9. Continue programming or exit authorized caller mode by dialing ✳ #.
NOTE:
If you have more than one SPIRIT Attendant answering the
same lines, you must follow the procedures in this section to
program every SPIRIT Attendant identically. Number of rings
to answer must not be identical for all SPIRIT Attendants.
same lines, you must follow the procedures in this section to
program every SPIRIT Attendant identically. Number of rings
to answer must not be identical for all SPIRIT Attendants.
10. To disconnect, dial #.
Programming a New Route for Blind Transferor Disconnect
Follow the steps below to program a blind transfer:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Select an outside line and dial a telephone number that is answered by your
SPIRIT Attendant.
SPIRIT Attendant.
Wait for an answer.
Dial ✳ followed immediately by your authorized caller code and #.
The two-beep confirmation tone sounds.
Dial ✳ 8 followed immediately by the route number (0 through 9).
Dial the route code:
11 =
Day Route
22 =
Night Route
Dial the transfer code:
2
=
Blind Transfer
5
=
Disconnect
Dial the extension number where the caller will be connected.
Dial ##.
The two-beep confirmation tone sounds.
Continue programming or exit authorized caller mode by dialing ✳ #.
NOTE:
If you have more than one SPIRIT Attendant answering the
same lines, you must follow the procedures in this section to
program every SPIRIT Attendant identically. Number of rings
same lines, you must follow the procedures in this section to
program every SPIRIT Attendant identically. Number of rings
to answer must not be identical for all SPIRIT Attendants.
To disconnect, dial #.
2-12
Changing the Current Settings