Avaya t3 classic 사용자 가이드
Changing general settings
84
Customizing the telephone
Redial every x seconds
When you have switched automatic redial (
When you have switched automatic redial (
p. 24) : you set here the time that
elapses before your telephone redials automatically.
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Redial every menu item. The currently specified time interval bet-
ween two redials is shown in brakkets.
If necessary, press several times to select the desired time interval between
redials.
Exit menu. The new setting is saved.
i
Note
• You can select times of 15, 30, 60, 90 or 120 seconds.
Automatic handsfree when called
If you switch on this function, your telephone automatically accepts all internal calls.
On receiving a call, you hear a short attention tone and you can then speak in hands-
free mode to the caller immediately without pressing any key and without picking up
the receiver.
If you switch on this function, your telephone automatically accepts all internal calls.
On receiving a call, you hear a short attention tone and you can then speak in hands-
free mode to the caller immediately without pressing any key and without picking up
the receiver.
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Handsfr. answ-back menu item. An indication on the right hand
side of the window shows whether the function is on or off.
Switch the function on or off. The new status is displayed.
Exit menu. The new setting is saved and a status message appears.
i
Note
• When your caller terminates the call, a new call can be taken immediately.