Epson 1915 네트워크 가이드

Using Multi-Screen Display

Procedure Before Using the Multi-screen Display
Function

Setting the Virtual Display

This section explains the virtual display for arrangement example 1.
s

Enable the virtual display driver (Windows only)

Enable the virtual display driver. Those users listed below do not have to
perform this operation. Go to procedure s "Adjusting the Virtual
Display"

p.34

• Those users who have enabled virtual displays installing EasyMP

Network Projection.

• For Macintosh users.

Procedure

Start Windows on the computer, then select "Start" -
"Programs" (or "All Programs") - "EPSON Projector" -
"Add-Remove EPSON Virtual Display".

The Add-Remove EPSON Virtual Display screen is displayed.

Select the virtual display you want to use.

Up to four monitors can be added. In this example, a single virtual
display is to be used. When setting multiple virtual displays, select
as many displays as is necessary.
Any one of the displays can be selected.

Click "OK".

When you click OK, the drivers for the virtual display are enabled.
At this point, it is normal for the display to flicker. Wait for the
Add-Remove EPSON Virtual Display screen to close.

1. Setting the Virtual Display s

p.33

In a Windows environment, enable the virtual display driver as
necessary. And, for both Windows and Macintosh, set up the virtual
display arrangement.

2. Allocating the image to be projected s

p.37

Open the file to be projected, and then move the screen to the virtual
display according to the actual projection arrangement.

3. Projecting the allocated images s

p.38

Allocate a virtual display number to a projector that is connected
through the network, and then start projection.