Epson 450W 사용자 가이드
48
Connecting to Computers, USB Devices, and Other Equipment
4. Press the
Computer
button on the remote control to select your
computer as the source. (The wireless mouse function doesn’t
work when other sources are selected.)
work when other sources are selected.)
5. If necessary, configure your computer to work with a USB mouse.
See your computer documentation for details.
Connecting an External Monitor
If you want to view your computer presentation close-up (on a
monitor) as well as on the screen, you can connect an external
monitor. You can use it to check on your presentation even if you’ve
pressed the
monitor) as well as on the screen, you can connect an external
monitor. You can use it to check on your presentation even if you’ve
pressed the
A/V Mute
button or switched to a different picture source.
Only computer images will appear on the external monitor, not video
images.
images.
First make sure your computer’s VGA cable is connected to the
projector’s
projector’s
Computer1 or Computer2
connect your monitor to the projector’s
Monitor Out
port, as shown:
note
Some LCD monitors may
not be able to display the
image correctly. If you have
trouble displaying the
image, connect a multiscan
monitor. If you’re projecting
computer images, make sure
the computer’s refresh rate is
set to 65 Hz or greater.
not be able to display the
image correctly. If you have
trouble displaying the
image, connect a multiscan
monitor. If you’re projecting
computer images, make sure
the computer’s refresh rate is
set to 65 Hz or greater.
The projector must be
turned on for the Monitor
Out port to send a signal to
the monitor (though it may
be in standby mode). Make
sure Standby Mode is set to
turned on for the Monitor
Out port to send a signal to
the monitor (though it may
be in standby mode). Make
sure Standby Mode is set to
Communication On
in
the Extended menu. See
page 67.
page 67.