Epson 450W 사용자 가이드

You can use a standard web browser to monitor and control the 
projector through the network. Because you can use your computer’s 
keyboard, you may find it easier to make network settings using your 
browser than using the projector’s remote control.

1. Make sure the projector is set up for your network, as described 

on page 76. (Standby Mode in the Extended menu should be set 
to 

Communication On

 to monitor the projector in standby 

mode.) When using a browser to access the projector, you cannot 
connect through a proxy server.

2. Open your web browser and enter the IP address of the projector 

you want to monitor in the browser window. 

If you’re not sure what the address of the projector is, turn the 
projector on and select 

Net. Info.-Wired LAN

 or 

Net. 

Info.-Wireless LAN

 from the Network menu to display the IP 

address of the projector. Do not enter leading zeroes.

3. Press 

Enter

, or, if you set a Web control password in the 

projector’s Network menu, enter your user name and password, 
then press 

Enter

. You see a screen like the following: