Epson 825 설치 설명서
Troubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on your
computer, check the following:
computer, check the following:
•
Make sure the power light on the projector is green and not flashing, and
the A/V Mute slide is open.
the A/V Mute slide is open.
•
Press the Source Search button on the projector or the Search button
on the remote control to select the computer as the image source.
on the remote control to select the computer as the image source.
•
If you’re using a Windows notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be labelled
CRT/LCD or have an icon such as
CRT/LCD or have an icon such as
. You may have to hold down the
Fn key while pressing it.
If the projector and notebook don’t display the same
image...
Windows
Try using the CRT/LCD or
key as described above. On most systems, this
key lets you toggle between the LCD screen and the projector, or display on
both at the same time.
both at the same time.
If that doesn’t work, check your monitor settings to make sure both the LCD
screen and the external monitor port are enabled.
screen and the external monitor port are enabled.
1
From the Windows Control Panel, open the Display utility. In Windows
Vista
Vista
®
, right-click on the desktop and select Personalize, then select
Display Settings.
2
Click Settings, then click Advanced. In Windows Vista, click Advanced
Settings.
Settings.
3
The method for adjusting the setting varies; you may have to click a
Monitor tab, then make sure the external Monitor port is set as your
primary display and/or enabled.
Monitor tab, then make sure the external Monitor port is set as your
primary display and/or enabled.
Mac OS
®
X
1
From the Apple
®
menu, select System Preferences, then select Display
or Displays.
2
Click Detect Displays.
3
Make sure the VGA Display or Color LCD dialog box is selected.
4
Click Arrangement or Arrange, then make sure Mirror Displays is
selected.
selected.
Project over the network
Install EMP NS Connection on each computer that will project over the
network. Use the CD labeled Epson Projector Software for Meeting &
Monitoring to install EMP NS Connection. If you need to configure the
projector for your network, see “Network Configuration.”
network. Use the CD labeled Epson Projector Software for Meeting &
Monitoring to install EMP NS Connection. If you need to configure the
projector for your network, see “Network Configuration.”
1
Press the LAN button on the remote control.
2
Start EMP NS Connection on your computer.
Windows: Select Start > Programs or All Programs > EPSON
Projector > EMP NS Connection.
Projector > EMP NS Connection.
Mac OS® X: Double-click the EMP NS Connection icon in your
Applications folder.
Applications folder.
3
Select Advanced Connection Mode and click OK.
4
Select the projector you want to connect to, then click Connect.
If you don’t see the projector you want, click the Automatic search
button.
button.
5
If you see a message asking for a keyword, enter the four digits that
appear on the LAN standby screen and click OK.
appear on the LAN standby screen and click OK.
Your computer image is projected, with a floating toolbar:
When you’re done presenting, click Disconnect on the toolbar.
NOTE:
Using the optional Wireless LAN module, you can project
wirelessly. To purchase the Wireless LAN module or other accessories,
see “Optional Accessories.” For more information about using the
projector on a network, see your User’s Guide and EasyMP Operation
Guide.
see “Optional Accessories.” For more information about using the
projector on a network, see your User’s Guide and EasyMP Operation
Guide.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2009 Epson America, Inc. 2/09
Printed in XXXXXX
Printed in XXXXXX
CPD-27443
Network configuration
If you need to configure the projector for your network, you can use the
projector’s menu system.
projector’s menu system.
1
Press the Menu button on the remote control, select the Network menu,
then press Enter.
then press Enter.
2
Choose Network Configuration and press Enter.
3
Select the Wired LAN menu and press Enter.
4
Choose IP Settings and press Enter. You see a screen like the following:
5
Do one of the following:
•
If your network assigns addresses automatically, turn on the DHCP
setting.
setting.
•
If your network does not assign addresses automatically, turn
off DHCP and enter the projector’s IP Address, Subnet Mask, and
Gateway Address, as needed.
off DHCP and enter the projector’s IP Address, Subnet Mask, and
Gateway Address, as needed.
To enter numbers, use the
buttons on the remote control to
highlight the number you want to input, then press the Enter button.
When you’re finished entering an address in the network menu, highlight
Return, then press the Enter button.
When you’re finished entering an address in the network menu, highlight
Return, then press the Enter button.
6
To prevent the IP address from appearing on the standby screen, set the
IP Address Display setting to Off.
IP Address Display setting to Off.
7
When you’re done making all necessary changes, select Complete and
press the Enter button to save your settings. Then press Enter again to
confirm.
press the Enter button to save your settings. Then press Enter again to
confirm.
8
Press the Menu button to exit the menu system.
Where to get help
Manuals
For more information about using the projector, install the manuals from your
projector CD.
projector CD.
Telephone Support Services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of these numbers:
This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of these numbers:
U.S.:
(562) 276-4394, 6 AM to 6 PM, Pacific Time,
Monday through Friday
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,
Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
distance charges may apply.
Internet Support
Visit Epson’s support website at epson.com/support and select your
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Registration
Register today to get product updates, special promotions, and customer-only
offers. You can use the registration card or CD included with your projector, or
register online at www.epson.com/webreg.
offers. You can use the registration card or CD included with your projector, or
register online at www.epson.com/webreg.
Optional accessories
You can purchase screens, carrying cases, or other accessories from an Epson
authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S.
sales) or www.epson.ca (Canadian sales).
authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S.
sales) or www.epson.ca (Canadian sales).
Product
Part number
Replacement lamp
V13H010L50
Air filter replacement set (2 filters)
V13H134A22
Image presentation camera (ELPDC05)
V12H162020
DC-10s document camera
ELPDC10S
DC-06 document camera
V12H321001
Wireless LAN module
V12H306P11
Quick Wireless Connection USB key
V12H005M05