Epson dfx-8000 제품 데이터시트
DFX-8000 DOT-MATRIX PRINTER
Installation/Support Tips
Physical lnstallatlon
The DFX-8000 printer is
a
very easy
printer to set up, but due to the fact
that It is a very hiqh-speed machine. special care must be taken to
ensure that a proper paper path is established. Epson printer stand
model 8501-A is specially designed to accommodate the printer, and its
ensure that a proper paper path is established. Epson printer stand
model 8501-A is specially designed to accommodate the printer, and its
use is recommended but not required. This stand provider a catch bin
and a paper supply shelf large enough to hold paper for both the front
and rear tractors, as well as detents, which hold the printer securely in
place.
and rear tractors, as well as detents, which hold the printer securely in
place.
lf this stand is not used, make sure that the paper supply to both
tractors is properly aligned (no skewing to either aide) and that the
paper
exiting does not interfere with the rear paper supply. Also ensure
that the power
and
interface
cable are routed
away from both
incoming and exiting paper.
Software lnstallation
The DFX-8000 is code-compatible with the Epson FX printer series, and
therefore it will perform property with virtually all popular software. Most
therefore it will perform property with virtually all popular software. Most
software provides Epson FX printer support, but programs that do not
have an FX driver should work properly in LX, RX, MX, or Epson drivers
have an FX driver should work properly in LX, RX, MX, or Epson drivers
are selected.
DFX-8000-8
5/23/90
9-Pin Printers