Epson EMP-8300 빠른 참조 카드

Double-click: Press twice in rapid succession.

The wireless mouse function may not operate correctly depending on the computer version 
or function being used.

1. Hold down the          button for approx. 

1.5 seconds.

The          button lights and drag and drop 
mode is enabled.

2

. Tilt the        button to drag an item.

3. Press the          button to drop the item.

When projecting images from a computer, the accessory projector's remote control can be used to 
operate the computer's mouse pointer.

You can also drag and drop in the same way 
using the          button.

Right click

Left click

To previous slide

To next slide

Displaying previous or next slides in a 
PowerPoint slideshow

This function lets you display separate images in a smaller screen (sub-
screen) over the top of the images that are currently being projected 
(main screen).

The images are paused and unpaused each time this button is pressed.

(EMP-8300 only)
This lets you set the lamp brightness to one of two settings. Select "Low" 
if the images being projected are too bright such as when projecting 
images in a dark room or onto a small screen. When used at low 
brightness, the life of the lamp will be extended.

This function lets you select the input source for projected images while 
viewing the image contents on an external monitor.
Images can be checked on an external monitor while using the "A/V Mute" 
function and while the projector is not projecting images (while it is in 
standby mode).

If using more than one projector at a time, such as at a show, you can 
record ID numbers for the projectors and for the remote controls in order 
to use a remote control to simultaneously operate only projectors with the 
same ID number.

This lets you monitor multiple projectors and turn their power on and off 
and change the signal sources via a network.
In addition, if a problem occurs with the projector, the projector can send 
an e-mail message to notify someone of the problem.

9300E-QRG_06-09