Epson EX100 사용자 가이드
10
Welcome
Unpacking the Projector
After unpacking the projector, make sure you have all the parts shown
below:
below:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the carrying case. See page 11 for ordering information, and
page 66 for transportation instructions.
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the carrying case. See page 11 for ordering information, and
page 66 for transportation instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
additional components:
■
To receive an S-Video signal, you’ll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see below.
may be provided with your video equipment, or you can purchase
one from Epson; see below.
■
To receive a component video signal from a VCR or other video
device, you’ll need the VGA-to-Component Video adapter
device, you’ll need the VGA-to-Component Video adapter
Projector
Remote control and
2 AAA batteries
Power cable
VGA computer cable
Audio adapter
Carrying case
PDF manual and
registration CD-ROM
VGA-to-Component
Video adapter
EX100_User's Guide.book Page 10 Wednesday, April 30, 2008 12:08 PM