Epson EX100 사용자 가이드

Connecting to Computers and Other Equipment

Connecting a Component Video Source

You will need a VGA-to-Component Video adapter (included with
your projector) and a component video cable. Or you can use a
VGA-to-Component Video cable (ELPKC19) from Epson; see
page 11 for ordering information.

1. Locate a VGA-to-Component Video cable or adapter.

2. Connect the cable or cable and adapter to your video source and

the blue

Computer/Component Video

connector on the

projector.

3. If you want to play sound through the projector, see page 41 for

instructions on connecting audio cables.

4. If you don’t need to make any other connections, see page 15 for

instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the

button on the remote control or press the

Source

button on the projector’s control panel repeatedly until

the image appears.

note

Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player’s documentation.

Also, make sure the
Computer Input setting in
the Signal menu is set to
Auto or Component Video
(see page 49).

VGA-to-Component Video
cable (ELPKC19)

VGA-to-Component
Video adapter

EX100_User's Guide.book Page 39 Wednesday, April 30, 2008 12:08 PM