Epson 62c 사용자 가이드

2. Once the image is positioned where you want, release the lever to 

lock the foot in position.

3. To fine-tune the height of the image, 

rotate the foot at the back of the 
projector.

If the image is no longer rectangular after 
raising it, see the next section.

The projector automatically corrects images that are distorted when 
the projector is tilted up or down (up to a 30° tilt). The Keystone 
window appears on the screen while the projector makes the 
correction. If the projected image still isn’t rectangular or has a 
“keystone” shape, do one or more of the following:

■

If your image looks like 

 or 

, you’ve placed the projector 

off to one side of the screen, at an angle. Move it directly in front 
of the center of the screen, facing the screen squarely.

■

If your image looks like 

 or 

, the Auto Keystone feature 

may have been disabled or you may need to manually adjust the 
keystone correction value. (Auto Keystone is not available when 
you’re using ceiling or rear projection.) Follow the directions 
below:

■

To turn on Auto Keystone, press the 

Menu

 button on the 

remote control. Use the

 pointer button on the remote 

control (or the arrow buttons on the projector) to select the 

Settings

 menu, then press 

Enter

. If 

Auto Keystone

 is 

OFF

, 

use the

 pointer button to highlight this option and press 

Enter

. Select 

ON

 in the Auto Keystone window that appears 

and press 

Enter

 to save your changes. Exit the menu by 

pressing the

 Menu

 button. 

Enter button

Menu button

Pointer button