Epson 62c 빠른 설정 가이드
5
Adjust the image
1
To raise the image, press the foot adjust button and lift the front
of the projector. Release the button to lock the foot in the position
you want.
of the projector. Release the button to lock the foot in the position
you want.
2
Rotate the focus ring to sharpen the image.
3
Rotate the zoom ring to reduce or enlarge the image. (You can also
move the projector closer to or farther from the screen.)
move the projector closer to or farther from the screen.)
4
If your image looks like
or
, first make sure the projector
is facing the screen squarely. Then, if necessary, press the
and
buttons on the projector’s control panel until the image is corrected.
5
To select the best color mode, press the
Color Mode button on the projector’s
remote control repeatedly to move through
the options.
remote control repeatedly to move through
the options.
See your
User’s Guide on the CD-ROM for more
information about image adjustments.
6
Install your
User’s Guide
and register your projector
1
Insert the CD-ROM in your drive. If the installer doesn’t open
automatically, double-click the
automatically, double-click the
Epson CD-ROM icon, then
double-click the
Epson installer icon.
2
Choose
English, then follow the on-screen instructions to register your
projector.
3
When you are done registering, click
User’s Guide to install it.
If you don’t already have Adobe Reader, click
Adobe
®
Reader
®
and
follow the on-screen instructions to install it.
4
When the guide is installed, double-click the
User’s Guide icon on
your desktop to open your
User’s Guide.
4
Plug in and turn on
1
Press in the tabs and remove the lens cover.
2
Connect the power cord to the projector and plug
the other end into an electrical outlet.
the other end into an electrical outlet.
The
power light turns orange.
3
If you are connecting a device other than a computer, such as
a DVD player, turn on your equipment. (If you are connecting
to a computer, don’t turn it on yet.)
a DVD player, turn on your equipment. (If you are connecting
to a computer, don’t turn it on yet.)
4
Press the
Power button on the projector or remote control.
You hear a beep, the
power light flashes green, and the
projector lamp comes on in about 4 seconds. The
power
light stays green.
5
If you are using a computer, turn it on now.
6
Start your video or presentation. If you have
connected more than one video source, press
the
connected more than one video source, press
the
Comp1, Comp2, S-Video, or Video button
on the projector remote control to select the
one you want to watch.
one you want to watch.
Source buttons
If you connected a notebook
computer and no image is being
projected, you may need to set up
the notebook to display on an external
device. See the
computer and no image is being
projected, you may need to set up
the notebook to display on an external
device. See the
Troubleshooting
section for instructions.
NOTE
Turning off the projector
1
When you’re finished using the projector, first turn off the
video source.
video source.
2
Press the
Power button on the projector or remote control.
3
When you see the confirmation message, press the
Power
button again. The projector beeps twice, the lamp is turned off,
and the
and the
power light turns orange.
4
When the
power light is a steady orange, unplug the projector.
With Epson’s exclusive Instant Off
TM
technology there’s no
cool-down period, so you can pack up and go immediately
after turning off the projector.
after turning off the projector.
Caution:
Never unplug the projector when the
power light is green
or flashing orange.
Where to get help
Telephone Support Services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661 and
enter the PIN on the included Epson PrivateLine Support card. This
service is available 6
service is available 6
AM
to 6
PM
, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a
projector support specialist by dialing one of these numbers:
projector support specialist by dialing one of these numbers:
U.S.:
(562) 276-4394, 6
AM
to 6
PM
, Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6
AM
to 6
PM
, Pacific Time, Monday-Friday
Toll or long distance charges may apply.
Electronic Support Services
Epson provides technical assistance through electronic support
services 24 hours a day at http://support.epson.com. For tips,
templates, and training for developing successful presentations
go to http://www.presentersonline.com.
services 24 hours a day at http://support.epson.com. For tips,
templates, and training for developing successful presentations
go to http://www.presentersonline.com.
Accessories
You can purchase video cables, screens, carrying cases, or other
accessories from an Epson authorized reseller. Please call 800-GO-EPSON
(800-463-7766) for product information and to find the nearest authorized
reseller. To purchase online, visit the Epson Store
accessories from an Epson authorized reseller. Please call 800-GO-EPSON
(800-463-7766) for product information and to find the nearest authorized
reseller. To purchase online, visit the Epson Store
SM
at www.epsonstore.com
(U.S. sales only). In Canada, call (800) 463-7766 for dealer referral.
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on your
notebook, check the following:
notebook, check the following:
Make sure the
power light on the projector is green and not
flashing and the lens cover is off.
Try turning off the notebook and restarting it.
If you’ve connected more than one computer and/or video source,
you may need to press the
you may need to press the
Source Search button on top of the
projector to select your video source. (Allow a few seconds for the
projector to sync up after pressing it.)
projector to sync up after pressing it.)
If you’re using Windows,
®
hold down the
Fn key and press the
function key that lets you display on an external monitor. It may
have an icon such as
have an icon such as
, or it may be labeled CRT/LCD.
Allow a few seconds for the projector to sync up after pressing it.
If the projector and the notebook don’t display
the same image
the same image
If you’re using a Windows notebook:
On most systems, the
or CRT/LCD key lets you toggle
between the LCD screen and the projector, or display on both at
the same time.
the same time.
You might need to use the Display utility in the Control Panel to
enable both the LCD screen and external monitor port. Check your
notebook’s manual or online help for details.
enable both the LCD screen and external monitor port. Check your
notebook’s manual or online help for details.
If you have dual monitor support, you may need to uncheck the
option to extend your Windows desktop in the Display Properties.
option to extend your Windows desktop in the Display Properties.
If you’re using a Macintosh
®
PowerBook
®
with OS X:
1.
From the Apple
®
menu, select
System Preferences, then click
Display or Displays.
2.
Select
VGA Display or Color LCD, click Arrangement or Arrange,
and click
Mirror Displays.
Epson is a registered trademark and Instant Off is a trademark of Seiko Epson Corporation. PowerLite and
PrivateLine are registered trademarks and Epson Store is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
© 2005 Epson America, Inc. 9/05
Printed in XXXXX
PrivateLine are registered trademarks and Epson Store is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
© 2005 Epson America, Inc. 9/05
Printed in XXXXX
CPD-20550
Color Mode
button
button
You can also register at
www.epson.com/webreg.
NOTE
Register today to get product updates, special promotions,
and customer-only offers.
and customer-only offers.
Zoom ring
Focus ring