Epson 745c 사용자 설명서
164
Solving Problems
■
If you’re using Access Point mode and you’re connecting to the
wrong network, you may be experiencing signal interference from
another network. Try resetting your access point or base station,
then restart NS Connection.
wrong network, you may be experiencing signal interference from
another network. Try resetting your access point or base station,
then restart NS Connection.
■
If you’re using AirPort, the projector’s ESSID should match the
AirPort network name, not the name of the AirPort base station.
To check the network name, start the AirPort Admin utility,
select your base station, and click
AirPort network name, not the name of the AirPort base station.
To check the network name, start the AirPort Admin utility,
select your base station, and click
Configure
. Then click
Show
All Settings
. The network name appears on the AirPort tab.
■
If you’re prompted for a password when you connect, enter the
WEP encryption key (if you’re using WEP encryption).
WEP encryption key (if you’re using WEP encryption).
■
Try connecting using IP Connect Mode; see page 80.
Solving EasyMP Problems
An image displayed with EasyMP appears distorted.
Because of their resolution, some JPEG images cannot be displayed
correctly. Some JPEG files from digital cameras cannot be previewed.
Files with a high compression ratio may appear blurry.
correctly. Some JPEG files from digital cameras cannot be previewed.
Files with a high compression ratio may appear blurry.
In EMP SlideMaker 2, PowerPoint files don’t appear in the
file window.
file window.
EMP SlideMaker 2 does not support PowerPoint 95 or 97. Files
created in these versions of PowerPoint must be opened and resaved in
PowerPoint 2000 or later.
created in these versions of PowerPoint must be opened and resaved in
PowerPoint 2000 or later.
In EMP SlideMaker 2, your PowerPoint files don’t display
thumbnails and can’t be pasted into scenarios.
thumbnails and can’t be pasted into scenarios.
Make sure the MS Office JPEG converter has been installed. Run the
Office installer, display the
Office installer, display the
Converters and Filters
option, and
install the JPEG filter. Also, make sure PowerPoint is installed on the
computer you’re using to build the scenario.
computer you’re using to build the scenario.
Canada User's Guide.book Page 164 Friday, September 3, 2004 3:49 PM