Epson 745c 사용자 설명서

Presenting Through a Wireless Network

then press the

pointer button to the right to move to the

next character position. When done typing the password,
press

Enter

3. When you’re done making settings, highlight the

button at

the top of the screen and press

Enter

Projecting Wirelessly

Once you’ve started EasyMP and set up your projector and computer
in either Ad Hoc mode or Access Point mode, follow these steps to
start NS Connection and project wirelessly.

1. Make sure you’ve installed your 802.11G/B wireless card in your

projector (see page 50).

2. Windows: Select

EMP NS Connection

from the Start menu.

Macintosh OS X: Double-click the

EMP NS Connection

icon in

your Applications folder.

3. The first time you start NS Connection, you may see a dialog box

asking you to select your network. Select the IP address for your
computer’s network card and click

note

If you don’t see your network
adapter’s IP address, allow a
minute for it to appear. If
your access point or AirPort
base station uses DHCP
(

Distribute IP addresses

setting is enabled for
AirPort), sometimes it takes
a minute for the server to
pick up the IP address.

Once you’ve selected the IP
address for your network
adapter, you won’t see the
Switch network dialog
box when you start
NS Connection. If you want
to change to a different
network adapter, click

Extension

on the EMP NS

Connection dialog box, then
click

Switch LAN

on the

extension dialog box.

Canada User's Guide.book Page 74 Friday, September 3, 2004 3:49 PM