Epson 745c 사용자 설명서

Presenting from a Memory Card, Digital Camera, or External Drive

Inserting a Memory Card in the
Projector

Follow these steps to insert the memory card in the projector:

1. If necessary, insert the card into a PC card

adapter. (ATA flash cards don’t require an
adapter.)

2. Insert the card (with the adapter) into the projector with the label

facing up. The projector does not have to be turned off before
inserting the card.

Removing a Memory Card

When you’re done using the projector and want to remove the
memory card, follow these steps.

1. Make sure the card is not in use (the indicator light next to the

card slot should be off).

2. Press the eject button above the card slot.

The button pops out.

3. Press the button again. The memory card is released, and you can

remove it from the slot in the projector.

4. To remove the card from the adapter, pull

it out as shown:

note

If a digital camera is
connected to the projector,
disconnect it before
inserting the memory card.
The memory card is not
functional when a digital
camera is connected.

caution

Never force the card into the
slot; you could damage the
projector.

Eject button

note

If you are using CardPlayer,
highlight the

EJECT

button

and press

Enter

on the

remote control. Then wait
for the indicator light to go
off before you eject the card.

Canada User's Guide.book Page 86 Friday, September 3, 2004 3:49 PM