Epson 745c 제품 데이터시트

Epson PowerLite 745c Projector

8/04

Managing Projectors from a Remote
Computer

The software included with your projector lets you monitor
and control projector(s) from a remote computer. These
features are intended for use by network administrators.
❏ Use EMP Monitor to see your projectors’ status, switch

image sources, and control basic settings.

❏ Use the mail notification function to receive e-mail alerts

about possible problems.

❏ Use a network management utility running SNMP, such as

HP OpenView,

™

to manage your facility’s equipment from

a pre-existing system.

Make sure you have installed the EMP Monitor software
(included on the projector’s CD-ROM) on the computer you
want to use to monitor your projectors. (See the User’s Guide
for instructions.)

Note:
Your computer must be running Microsoft Windows XP, 2000,
Me or 98SE.

Opening and Closing EMP Monitor

To start EMP Monitor, click

Start > Programs

All

Programs > EPSON Projector > EMP Monitor

If you’ve added the program to the Startup programs folder, it
may already be open. If so, click the icon in the system tray on
the lower-right corner of your screen to display the EMP
Monitor window:

To close EMP Monitor, right-click the program icon shown
above, then select

Exit

Registering Projectors in EMP Monitor

Before you can monitor a projector, you have to register it.
Follow these steps:

1. Open EMP Monitor. You see this screen:

2. Click

projector

. You see this screen:

3. Click

Auto

detect to locate projectors currently operating

on the network. Or click

Manual

registration

and enter

the projector’s name and network address.

Note:
If Auto detect fails to find the projector, your projector may
not be connected or configured correctly for the network.

Any projectors found on the network are listed:

4. Select each projector you want to add by clicking its name

and clicking

Add

. When you’re done, click

Click here to start EMP Monitor

Click here