Epson 7800p 사용자 설명서

The remote control’s default ID is zero. If you need to change it, 
follow these steps:

1. Press the 

ID

 button on the remote control. You see it light. 

2. Press one of the numbered buttons on the remote control to select 

the desired ID (0 through 9). Select zero to control all projectors, 
or select a number to match the ID of the projector(s) you want to 
operate.

The 

ID

 button’s light shuts off and the new ID is registered. 

If you would like to check the remote control’s current ID, do the 
following:

1. Press the 

ID

 button twice in succession. After a moment, the 

button flashes. 

2. Count the number of flashes; this number corresponds to the 

remote control’s ID. (If it doesn’t flash, the ID is set to zero.)

Zero

Nine