Epson 77C 제품 데이터시트

Epson PowerLite S5 Series / 77c Projector

6 

- 

Epson PowerLite S5 Series / 77c Projector

5/07

❏ Hold down the 

Fn

 key and press the function key that lets 

you display on an external monitor. It may have an icon 
such as 

 or it may be labelled 

CRT/LCD

. Allow a few 

seconds for the projector to sync up after pressing it. Check 
your laptop’s manual or online help for details. 

On most systems, the 

 or 

CRT/LCD

 key lets you 

toggle between the LCD screen and the projector, or display 
on both at the same time. 

❏ If you’re projecting from a laptop, and you don’t see the 

same image on the projection screen and computer screen, 
check your monitor settings to make sure both the LCD 
screen and the external monitor port are enabled. 

From the Control Panel, open the 

Display

 utility. Click the 

Settings

 tab, then click 

Advanced

. The method for 

adjusting the settings varies by brand; you may need to click 
a 

Monitor

 tab, then make sure the external Monitor port is 

set as your primary display and/or enabled. See your 
computer’s documentation or online help for details. 

You may need to set up your system to display on the projector 
screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select 

System Preferences

, then 

click 

Display

 or 

Displays

.

2. Select 

VGA Display

 or 

Color LCD

, click 

Arrange

 or 

Arrangement

, and make sure 

Mirror Displays

 is checked.

When you’ve finished using the projector, follow the 
recommended procedure to shut it down.

Note:
When sleep mode is enabled and the projector has not received any 
input signals for the number of minutes specified in the Extended 
menu (from 1 to 30), the projector automatically turns off the lamp 
and enters “sleep mode.” This conserves electricity, cools the 
projector, and extends the life of the lamp. If you are done using the 
projector, unplug the power cord. If you want to start projecting 
again, plug it in and press the P 

Power

1. If you’re using a computer, shut it down first; otherwise you 

may not be able to see your computer’s display to shut it 
down properly.

2. To turn off the projector, press the P 

Power 

button on the 

projector or remote control.

You see this confirmation 
message: (If you don’t want 
to turn it off, press any other 
button or wait a few seconds 
until it disappears.)

3. Press the P

Power

 button again. The projector beeps 

twice, the lamp is turned off, and the power light turns 
orange.

®

If you want to turn the projector on again, press the 
P

Power

 button.

4. Press up on the blue foot release lever and lower the 

projector to retract the front adjustable foot, if necessary.

5. Close the 

A/V Mute

 slide.

6. Unplug the power cord.

7. Turn off and disconnect any 

equipment plugged into the 
projector.

8. If you won’t be using the projector for awhile, store it in the 

soft case that came with it or in a protective case.

Click here

Select Mirror 
Displays