Epson 8100i 사양 가이드
EPSON PowerLite 8100i/9100i Projector
12 - EPSON PowerLite 8100i/9100i
3/01
4. Use a screwdriver to loosen the three screws holding the
lamp unit in place. (You cannot remove these screws
completely.) Then lift up the handle and pull out the lamp
unit.
completely.) Then lift up the handle and pull out the lamp
unit.
5. Gently insert the new lamp as shown below. Make sure it’s
inserted securely. Tighten the screws on the new lamp.
6. Replace the lamp cover and tighten the screws. (Make sure
the lamp cover is securely fastened. The projector turns itself
off if the lamp cover is open.)
off if the lamp cover is open.)
7. Reset the lamp timer as described below.
Resetting the Lamp Timer
After you install a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used.
Follow these steps:
projector can keep track of how many hours it has been used.
Follow these steps:
1. Press the
Help
button and hold it down for at least 5
seconds. The Help menu will be displayed and then you will
see a menu asking if you want to reset the lamp ON time.
see a menu asking if you want to reset the lamp ON time.
2. Use the left arrow button (control panel) or press left on the
Enter
button (remote control) to select
Yes
.
3. Press
Enter
to reset the timer.
Optional Accessories
EPSON provides the following optional accessories for the
PowerLite 8100i and the PowerLite 9100i. You can purchase
these accessories from your dealer or by calling EPSON at
(800) 873-7766; or visit the EPSON Store at
www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 873-7766 for dealer referral.
PowerLite 8100i and the PowerLite 9100i. You can purchase
these accessories from your dealer or by calling EPSON at
(800) 873-7766; or visit the EPSON Store at
www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 873-7766 for dealer referral.
Related Documentation
CPD-11054R1
EPSON PowerLite 8100i/9100i
User’s Guide
User’s Guide
CPD-11055R1
EPSON PowerLite 8100i/9100i
Quick Setup Poster
Quick Setup Poster
Service Manual
TM-EMP8/9100
Parts Price Lists
PL-EMP8100; PL-EMP9100
Product
Product number
Customized carrying cases for the projector and its cables:
Hard shell carrying case
ATA shipping case
ATA shipping case
ELPKS22
ELPKS21
ELPKS21
Replacement lamp and air filter
ELPLP11
Short throw zoom lens
ELPLW01
Long throw zoom lens
ELPLL02
Extra long throw zoom lens
ELPLL03
Fixed short throw lens
ELPLR01
Ceiling mount
ELPMB31
Suspension adapter for ceiling mount
ELPMBAST
Kensington security lock
ELPSL01
Portable projection screens:
50-inch
60-inch
80-inch
60-inch
80-inch
ELPSC06
ELPSC07
ELPSC08
ELPSC07
ELPSC08
Remote IR receiver
ELPST04
Digital video cables:
DVI to DVI, 10 feet (3 meters)
DVI to DFP, 10 feet (3 meters)
DVI to DFP, 10 feet (3 meters)
ELPKC20
ELPKC21
ELPKC21
Communication kit cable set and computer cable to connect projector to
a second computer. There is also a Mac adapter set so you can connect
to a second Macintosh. You may also need the VGA-13W3 video cable
(ELPKC06) if you’re connecting the projector to a high-end workstation.
a second computer. There is also a Mac adapter set so you can connect
to a second Macintosh. You may also need the VGA-13W3 video cable
(ELPKC06) if you’re connecting the projector to a high-end workstation.
ELP communication cable set
Computer video cable
(HD15/H15, 1.8m)
Computer video cable
(HD15/HD15, 3.0m)
Computer video cable
(HD15/H15, 1.8m)
Computer video cable
(HD15/HD15, 3.0m)
ELPKC04
ELPKC02
ELPKC02
ELPKC09