Epson 600P 빠른 설정 가이드

Raise the image as needed. To do this, press the foot release
button and lift the front of the projector. Once the image is
positioned where you want it, release the button to lock the
foot in position. If you need to straighten the image, rotate
the round adjustable foot at the back of the projector.

If your image looks like      or      , press the Sync+ or Sync–
(vertical Keystone) button to correct the shape of the image.

If your image looks like      or      , you’ve placed the projector
at an angle to the screen. Move it directly in front of the center
of the screen, facing the screen squarely. Or press the Tracking+
or Tracking– (horizontal Keystone) button to correct the shape.

Rotate the focus ring to sharpen the image.

Rotate the zoom ring to reduce or enlarge the image.
(You can also move the projector closer to or farther
from the screen.)

If you see a blank screen or the No Signal message
after turning on your laptop, check the following: 

Make sure the     power light is green and
not flashing and the lens cover is off.

Try turning off the laptop and restarting it.

If you’ve connected more than one computer and/or video source,
you may need to press the Computer/YCbCr or Video button on top
of the projector. (Allow a few seconds for the projector to sync up
after pressing it.)

Make sure your cable is connected securely.

Press the function key that lets you display on an external monitor.
It may have an icon such as        , or it may be labelled CRT/LCD.
You may have to hold down the Fn (function) key while pressing it.
(Allow a few seconds for the projector to sync up after pressing it.)
Check your laptop’s manual or online help for details.

On most systems, the         or CRT/LCD key lets you toggle between
the LCD screen and the projector, or display on both at the
same time.

You might need to use the Display utility in the Control Panel
to enable both the LCD screen and external monitor port.

CPD-13952R1

EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc.
Copyright © 2002 by Epson America, Inc. Printed in Japan. 5/02

zoom ring

If you see a blank screen           after focusing,

see the box below. 

1. From the Apple

®

menu, select Control Panels, then click Monitors

or Monitors and Sound.

2. Click the Arrange icon.

3. Drag one monitor icon on top of the other. This lets you display

on the projector screen as well as the LCD screen.

If this option isn’t available, you may need to select one of the
Simulscan resolution settings:

1. Perform step 1 above, if necessary.

2. Click the Monitor icon.

3. Select a Simulscan resolution as shown. (Allow a few seconds for

the projector to sync up after making the selection.)

If you’re using Macintosh OS X, see “Solving Problems” in
your User’s Guide.

focus ring

No signal

drag one monitor icon
on top of the other

click here

select a Simulscan
resolution

click here

No signal

back
adjustable
foot