Epson 62c 사용자 가이드

Follow these instructions to connect the projector to a video player or 
satellite receiver that has an RGB video output port using the VGA 
computer cable that came with the projector.

Before starting, make sure the projector and your DVD player or 
other video source are turned off.

1. Connect one end of the VGA computer cable to the 

Computer1(Component) 

or 

Computer2(Component)

 port on 

the projector.

2. Connect the other end to the video port on your player.

3. To play sound through the projector, follow the instructions 

beginning on page 29.

If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.

If more than one device is connected to the projector, select 

Computer 1 (RGB)

 or 

Computer 2 (RGB)

 as the source, depending 

on which port you used, after projection starts by pressing the 

Source 

Search

 button on the projector or the 

Comp1

 or 

Comp2

 button, 

depending on which port you used, on the remote control. See 
page 34.