Epson 62c 사용자 가이드

9. Lower the lamp cover into place. (The opening should be almost 

covered, and the top of the cover should be flush with the top of 
the projector.) Then slide the cover closed and tighten the screw.

10. Reset the lamp timer as described in the next section.

You must reset the lamp timer after replacing the lamp to clear the 

Replace the Lamp 

warning message. Follow these steps:

1. Connect the power cable and turn on the projector.

2. Press the 

Menu

 button on the remote control or projector and 

select the 

Reset

 menu. Then press 

Enter

. You see the following:

3. Select the 

Lamp-Hours Reset

 option and press 

Enter

. You see 

the following: 

Enter button

Menu button

Esc button