Epson 830p 제품 데이터시트

Epson PowerLite 830p 

10/04

Epson PowerLite 830p 

- 

9

This automatically resets the projector’s tracking, sync, 
resolution, and position settings.

If vertical bands appear in the projected image and pressing 
the 

Auto

 button doesn’t correct the problem, hold down the 

Shift

 button on the projector’s control panel while pressing 

either the 

Tracking +

 or the 

Tracking -

 button.

If the image appears fuzzy or flickers and pressing the 

Auto

 

button doesn’t correct the problem, hold down the 

Shift

 

button while pressing either the 

Sync +

 or 

Sync -

 button on 

the projector. 

When you’ve finished using the projector, follow the 
recommended procedure to shut it down. This extends the life 
of the lamp and protects the projector from possible 
overheating.

Note: You can set the projector to automatically turn off the 
projector lamp and enter “sleep mode” when it has not received 
any signals for 30 minutes. This conserves electricity, cools the 
projector, and extends the life of the lamp. To start projecting 
again, press the P

Power

projector, unplug the power cord. To turn off sleep (standby) 
mode, see the User’s Guide. 

1. Turn off any equipment plugged into the projector. 

2. To turn off the projector, press the red P

Power

 button 

on the projector or remote control. 

You see a confirmation message. (If you don’t want to turn 
the projector off, press any other button.)

3. Press the P

Power

 button again. The projector beeps 

twice, the lamp is turned off, and the 

Power

 light flashes 

orange for about 30 seconds as the projector cools down. 
After the projector has cooled, the orange light stays on and 
the exhaust fan shuts off.

To turn the projector on again, wait until the orange light 
stops flashing. Then press the P

Power

 button.

4. If you extended the adjustable front foot, press up on the 

blue foot release lever to retract it.

5. Replace the lens cap and unplug the power cord.

6. If you’re using a remote control, set its 

ON/OFF 

switch to 

OFF

.

Auto button

Power button