Epson 830p 매뉴얼
12
Welcome
Unpacking the Projector
After unpacking the projector, make sure you have all the parts shown
below:
below:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use a carrying case. See page 13 for ordering information, and
page 100 for transportation instructions.
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use a carrying case. See page 13 for ordering information, and
page 100 for transportation instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
additional components:
■
To receive an S-Video signal, you’ll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see page 13.
may be provided with your video equipment, or you can purchase
one from Epson; see page 13.
■
To receive a component video signal from a VCR or other video
device, you’ll need a component video cable. You can purchase
one from Epson; see page 13.
device, you’ll need a component video cable. You can purchase
one from Epson; see page 13.
note
You won’t need all these
components; your
configuration will determine
which ones you need.
components; your
configuration will determine
which ones you need.
Projector
Remote control
and batteries
Projector software
CD-ROM
Power cable
VGA computer cable
USB cable