Epson 830p 매뉴얼

You can use the menu system to turn standby mode on or off, adjust 
the network settings, change the language, and customize the way the 
projector displays images.

These options let you set up the projector so it can be monitored and 
controlled from a remote computer (see page 80). 

■

Standby Mode 

(in the Extended menu)

Select 

Network ON

 to enable the projector to be monitored over 

a network when it’s in standby mode. 

■

If you want to monitor the projector using a network 
management utility, select 

SNMP

 in the Network menu and 

enter at least one trap IP address. 

■

Projection 

(in the Extended menu)

Select 

Front

 (to project from the front of a screen and right side 

up), 

Front/Ceiling

 (when the projector is mounted upside-down 

from the ceiling), 

Rear 

(to project from behind onto a 

transparent screen), or 

Rear/Ceiling

 (to project from behind onto 

a transparent screen when the projector is mounted upside-down 
from the ceiling). 

■

Language 

(in the Extended menu)

Select from nine languages to be used for the projector menus.

In Sleep Mode, the projector automatically turns off the lamp when it 
has not received any signals from connected sources for 30 minutes. 
This conserves electricity, cools the projector, and extends the life of 
the lamp. When you want to start projecting again, just press the P 

Power

 button. 

In the Extended menu, select 

Operation

, 

Sleep Mode

, and choose 

ON

 or 

OFF

.

Network ON