Epson 830p 매뉴얼
Managing Projectors
85
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors using the
Status, Video Source, and Error icons shown below. These let you see
which projectors are currently being used, from which source (or port)
they are projecting an image, and if a problem occurs.
Status, Video Source, and Error icons shown below. These let you see
which projectors are currently being used, from which source (or port)
they are projecting an image, and if a problem occurs.
For detailed status information, select the projector and click
View
details
.
The following table explains the meaning of the status icons:
Status icons
(green)
Projecting; no problems
(dark)
Turned off; no problems
(green)
Projecting; problems detected
note
To monitor a projector
when it’s in Standby Mode
(plugged in but not turned
on), you must select
when it’s in Standby Mode
(plugged in but not turned
on), you must select
Network ON
as the
Standby Mode
setting in
the projector’s
Extended
menu (see page 75).
Remember that when
Standby Mode is set to
Standby Mode is set to
Network ON
, the exhaust
fan continues to operate
after the projector has cooled
down. This is normal.
after the projector has cooled
down. This is normal.
Status icon
Video Source
icon
icon
Error icon