Epson 830p 빠른 설정 가이드

1

Locate the required cables:

2

Connect the computer cable to the Computer1/Component port
on the projector.

3

Connect the other end to your notebook’s video-out
or 

monitor port.

If your notebook has a DVI connector, you need to either

use a DVI-to-VGA adapter with the included computer cable (see
your computer’s documentation), or purchase an optional DVI
cable (for a higher-quality image). See your User’s Guide.

T

u rn on your equipment

1

Connect the power cord to the projector, then plug the other end
into a grounded electrical outlet.

2

Turn on your notebook.

3

Remove the projector’s lens cover.

4

Press the 

Power button

to turn on the projector.

The Power light flashes green 
while the projector warms up 
and adjusts the focus. Then 
the light stays green.

C

onnect the pro j e c t o r

to your notebook

Follow these instructions to connect the projector to 
your notebook. For other setup options and complete
instructions, see your User’s Guide.

®

®

Quick Setup

VGA computer cable

1

If you’ve turned on your notebook and you don’t see an image, 
press the Source Search button on the projector to select the 
image source. 

If you still see a blank screen or have other display problems,

see the troubleshooting tips on the back of this sheet.

2

Press the Zoom (W or T) buttons to reduce or enlarge the image.

3

If your image looks like 

or 

, you’ve placed the projector off

to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely, or press the 

or 

Tracking buttons on the projector.

4

If your image looks like 

or 

, press the 

or 

Sync buttons 

on the projector.

Zoom
to adjust the
image size

A

djust the image

For faster startup, you can enable the Direct Power On feature.

See the User’s Guide.

Select an

image source

Power button

Power light

Power cord

CPD18224R1_Frb_SH.qxd  8/3/04  4:55 PM  Page 1