Epson Cinema 200 사용자 설명서

Make sure the projector is set up as described on page 13, then follow the instructions below 
to turn it on and display an image. 

1. Remove the lens cap.

2. Press the 

On

 button on the remote control, or press the 

Power

 button on the projector.

Note: If this is your first time using the remote control, 
make sure batteries are installed as described on page 50.

To keep children from turning on the projector, you can use 
the projector’s Child Lock (see page 25).

The projector takes about 30 seconds to warm up and 
display an image. If you don’t see a picture, you may 
need to change the image source as described on the 
next page.

Turn on the projector