Epson Cinema 500 릴리스 노트

Your projector includes an additional picture quality setting not described in your User’s Guide. 
If you notice faint vertical bands in the picture, you can eliminate them by following these steps:

1. Turn on the projector and let it warm up for about 10 minutes.

2. Darken the room lights. You do not need to project an image from a video source to perform 

this adjustment.

3. Press the 

Menu

 button on the remote control.

4. Use the 

 

arrow buttons to highlight the 

Setting

 menu, press 

to select it, then open the 

Operation

 menu and select 

LCD Panel Adjustment

.

You see this screen, which lets you correct each of the three RGB (red, green, blue) color 
components:

5. Select 

Vertical Stripe Adjustment R

. You see this screen:

6. Look at the screen to determine where the vertical bands are more visible—in the light or dark 

part of the screen. This is the part you should adjust first.

Note: The banding (if visible) appears within each bar or stripe on the screen.

®

®

Light part of 
the screen

Bands